Your Cart

IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v

IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v
IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v
IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v
IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v
IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v
IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v
IPOE-173S Industrial 10/100/1000Mbps 802.3bt PoE++ Splitter 12v/24v

Robust Industrial 802.3bt PoE++ Splitter 

The Planet IPOE-173S is an Industrial-grade 802.3bt Power over Ethernet Splitter which delivers the Ethernet digital data and PoE power from an 802.3bt PoE++ type-4 PSE (power source equipment) over UTP cable. It comes with a selectable 12V or 24V DC DIP switch, enabling to deliver a maximum of 70-watt power output to a non-PoE powered Ethernet device. It supports passive 10/100/1000Mbps Ethernet connection and distance up to 100 meters. To fulfill the growing industrial applications, the IPOE-173S is designed to work under the operating temperature range from -40 to 75 degrees C. The IPOE-173S is an ideal solution to transfer power to a traditional network device with high power demand directly without the need to install additional power outlets and electrical cabling in the industrial environment.

Quick and Easy 802.3bt PoE++ Network Deployment

If the existing network deployment consists of non-PoE powered devices that require high power to function, the IPOE-173S, powered by an ultra PoE power sourcing equipment, is able to feed the PDs with 802.3bt PoE++  as the splitter can split the data and power into two streams. The PDs gets their power through the splitter’s DC jack and the RJ45 interface accepts only Ethernet data. The following non-PoE PDs can be turned into an PoE++ environment with the IPOE-173S:

- PTZ speed dome IP camera

- Thin client

- AIO (All-in-One) touch PC

- Remote digital signage display

- Non-PoE network devices that need higher power to function

The POE-173S frees the network device deployment from restrictions of power outlet locations, thus eliminating the costs for additional AC wiring and reducing the installation time.

Innovative, Selectable DC Power Output Voltage

Via the innovative 12/24 volt DIP switch on the front panel, the IPOE-173S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices. It highly increases the flexibility of the product applications.

Dual Power Output Capability

The IPOE-173S shares its 70-watt output power with not only one power-hungry device but also two non-PoE Ethernet devices simultaneously through a 4-pin terminal block. For example, the two power output can be applied as shown below to completely solve the need of electric source:

- IP camera (Power 1) + Outdoor housing with fan and heater (Power 2)

- IP camera (Power 1) + Pan & tilt motor (Power 2)

- Analog camera (Power 1) + IP video server (Power 2) 

Environmentally Hardened Design

With the compact, slim-type IP30 industrial case, the space-saving industrial 802.3bt PoE++ splitter IPOE-173S can be placed in almost any difficult environment. It allows either DIN-rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-173S is the ideal product for co-working with industrial 802.3bt PoE++ type-4 injector which can feed the power to non-PoE devices up to 100 meters (328 feet) away in those harsh environments.



- 2 x RJ45 interfaces

- 1-port Data + Power input

- 1-port Data output

- 2 x DC output (4-pin terminal block)

- 1 x 12V/24V DC DIP switch


Power over Ethernet

- Complies with 802.3bt Power over Ethernet end-span / mid-span PSE

- Compatible with IEEE 802.3bt PoE++

- Backward compatible with 802.3at PoE+ with up to 30-watt power output 

- Supports PoE input power up to 70 watts

- Splits the PoE power over RJ45 Ethernet cable into 12V/19V/24V DC output

- Remote power feeding up to 100 meters



- IP30 slim metal case 

- DIN-rail or wall mount design

- Supports high surge/ESD protection

- Minus -40 to 75 degrees C operating temperature

Hardware Specifications

Interface PoE Input Port

1 10/100/1000 BASE-T RJ45

Data Output Port

1 10/100/1000 BASE-T RJ45

DC Out Plug Connector

1 removable 4-pin terminal block

DIP Switch

12V/24V DC output

LED Indicators PoE Input:

30W (Green)

60W (Green)

90W (Green)

DC Voltage:

12V (Amber)

24V (Green)

Data Rate 10/100/1000Mbps

Dimensions (W x D x H) 32 x 87.8 x 135 mm

Weight 445g

Installation DIN-rail/wall mountable

ESD Protection 4KV

EFT Protection 4KV

Enclosure IP30 metal case

Power Requirements 4-pair 802.3at PoE+ and 802.3bt PoE++

PoE DC 48 ~ 56V

Power Consumption System on with PoE input

5.4 watts

Full loading with maximum

12V DC, 5.8A output

81.6 watts

Power Output 802.3 bt type 3 PoE++ input

12V DC, 4.5A (max.)

24V DC, 2.2A (max.)

802.3 bt type 4 PoE++ input

12V DC, 5.8A (max.)

24V DC, 2.9A (max.)

Network Cable 802.3 bt PoE++ input


4-pair UTP Cat. 5e, 6, up to 100m (328ft)

802.3at PoE+ input


2-pair UTP Cat. 5, 5e, 6, up to 100m (328ft)

Power over Ethernet

PoE Standard 802.3 bt PoE++

4-pair 802.3at PoE+

Power Output DC 12V/24V by DIP switch control

PoE Power Supply Type End-span + Mid-span



Power Pin Assignment 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or

1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)

Standards Conformance

Standards Compliance IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt 4-pair Power over Ethernet Type 4

Regulatory Compliance FCC Part 15 Class A, CE


Operating Temperature -40~ 75 degrees C

Storage Temperature -40~ 85 degrees C

Humidity 5 ~ 95% (non-condensing)

Standard Accessories

Package Contents IPOE-173S x 1

User’s manual x 1

Wall-mount kit x 1

RJ45 dust cap x 2

802.3bt PoE++ Switch and Splitter Installation

For a place which is hard to find the power inlet, the IPOE-173S separates digital data and power into two optional outputs (12V/24V DC) to non-PoE devices such as laptops, PTZ (pan, tilt & zoom) IP cameras, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters.

Tags: ipoe173s