Your Cart

Connect-IT 2018 RS-232 to 20mA Current Loop Converter

Connect-IT 2018 RS-232 to 20mA Current Loop Converter
Connect-IT 2018 RS-232 to 20mA Current Loop Converter

Available Options

The Patton Model 2018 is an optically isolated, multi-function RS-232 to 20mA current loop converter: Hook it up to an active 20mA current loop circuit and it's a passive converter. Hook it up to a passive 20mA current loop circuit, add DC power to one of several DB-25 interface pins, and it's an active converter. Connect two units together, supply DC power to one interface, and it's an optically isolated RS-232 distance extender. 

The Model 2018 supports data rates to 19.2 Kbps, and current loop distances to 4 miles (6.4Km) over two twisted pair. The Model 2018 connects directly to either the RS-232 interface or the 20mA current loop interface using a male or female DB-25 connector. An external DCE/DTE switch eliminates the need for RS-232 crossover cables.

•Operates Actively or Passively

•Data Rates from 50 bps to 19.2 kbps

•Range to 4 Miles (6.4Km) over Two 24 AWG (.5mm) Twisted Pair

•No AC Power Required; Draws Necessary Power for (Passive) Operation from RS-232 Interface

•Optically Isolated on Line Side 

•DB-25 Connectors on Both Ends

•External DCE/DTE Switch

•Two Units Work Together as Optically Isolated RS-232 Distance Extenders

•Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.




































Interfaces: Asynchronous

Transmit Line: 19 - 26 AWG (.9mm - .4mm)

Range: 4 miles (6.4Km) on 24 AWG twisted pair

Interfaces: EIA RS-232, CCITT V.24 (.5 mm) full duplex, 20mA current loop

Data Rate: 50 - 19.2 Kbps

Isolation: 2500V RMS via opto-isolators on line side

Connectors: Male or female DB-25 on both sides

Temperature Range: 0-50°C (32-122°F)

Altitude: 0-15,000 feet (4.5Km)

Humidity: Up to 95% non-condensing

Power Supply: None required; uses power from NIC data signals

Dimensions: 2.21" L x 0.8" H x 2.10" W (5.6 x 2.0 x 5.3 cm)

Weight: 1.7 oz.