The EL9000 functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). Whether on the factory floor or the street corner, the EL9000 will provide flawless communications when you need it most. The EL9000 series supports multi-mode/single-mode fiber optics. The RJ-45 port on this unit provides Auto-MDIX and auto-negotiation. The linkfault-pass-through feature allows the network management agent on adjacent equipment to react to a broken link. Flexibility is the main feature of the EL9000, it may be DIN rail or panel mounted, and comes with power options to match the applications that require a tough, environmentally hardened, Gigabit Ethernet media converter.

- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- UL 1604 Class 1, Division 2 Classified for use in hazardous locations (applicable to versions with terminal block power option)
- DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/force mode, link down alarm
- 1000Mbps-Auto/Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- Redundant power inputs with Terminal Block or DC Jack
- -40°C to 75°C (-40°F to 167°F) operating temperature range
- Hardened aluminum case
- Supports DIN-Rail, Panel or Rack Mounting installation

Please see Datasheet

EL9000-X-Y-I-P
1000BASE-T to 1000BASE-SX/LX Hardened Media Converter

Gigabit Options:
(X) = A : 1000BASE-T (for Port 1 only)
(Y) = B : 1000BASE-SX (SC)
N : 1000BASE-LX (SC) -10Km
O : 1000BASE-LX (SC) -20Km
R : 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm -20Km
S : 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm -20Km
*More Gigabit options also available upon request.

Installation Type :
(I) = 1 : DIN Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480

Power Connector Options :
(P) = A : Terminal Block* / B : DC Jack**
*Options A -The Terminal Block type external power supply are not included. Please order the following part numbers,as required: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Options B -The external power adapter and power cord are not included. Please order the following part numbers, as required: 41-136044-X X=1,2,3,4,5