The ED3341 is a point-to-point Ethernet Extender designed to operate in harsh environments that efficiently extends 10/100 Ethernet circuits to over 200M (656ft.) up to 85Mbits using existing coaxial cable, and 1Mbits transmit performance when the distance is up to 2,600 meters (8,530ft.). The ED3341 functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). The ED3341 will allow Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution to Ethernet on the legacy surveillance infrastructure where systems have been upgraded from analog to IP-based. Installation is easy with a single switch setting; one end is set for local and the other remote. The ED3341 is used in pairs to extend Ethernet
connectivity over existing coaxial cable.

- Complies with NEMATS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- Ethernet Port: 10/100Mbps-Full-duplex, Auto-Negotiation,Auto-MDI/MDIX
- Ethernet Extender Port: Symmetrical on the VDSL, High-speed
- Full-duplex up to 85 Mbps communications link over existing coaxial cable
- Ten speeds with speed indicator LEDs on front panel of unit,Up to 85Mbps@about 200meters (656ft.) Down to 1Mbps@about 2,600meters (8,530ft.)
- -40°C to 75°C (-40°F to 167°F) operating temperature range
- Redundant power inputs with Terminal Block and DC Jack
- Support DIP switch to select Local or Remote side
- Hardened aluminum case
- Supports DIN-Rail Panel Rack Mounting installation

Please see Datasheet

Hardened 10/100BASE-TX Ethernet Extender Over Coaxial Cable

Power Input Interface:
(Z) = B: Terminal Block & DC Jack

Power Supply: (Optional)
*Option A - The Terminal Block type external power supply are not included. Please order the following part numbers, as required:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Option B - The external power adapter and power cord are not included. Please order the following part numbers, as required:41-136044-X X=1,2,3,4,5

Installation Type :
Optional Panel mount kit, part number: KP-AA96-480